|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
AZ2510 AZ 100 AMP LATCHING POWER RELAY FEATURES * * * * * 100 Amp switching Heavy loads to 24000 VA 4 kV dielectric Meets 8 mm creepage Mechanical position indicator which may be also used for manual operation or to actuate a micro-switch * UL, CUR pending CONTACTS Arrangement Ratings SPST (1 Form A) Resistive load: Max. switched power: 3000 W, 24000 VA Max. switched current: 100 A Max. switched voltage: 30 VDC, 400 VAC Rated Load UL, CUR Material Resistance 100 A at 240 VAC, 10k cycles, Resistive GENERAL DATA Life Expectancy Mechanical Electrical Set and Reset Pulse Duration Set Time (typical) Reset Time (typical) Silver tin oxide < 2 milliohms initially (24 V, 1 A voltage drop method) Dielectric Strength 4000 Vrms coil to contact (at sea level for 1 min.) 2000 Vrms between open contacts Insulation Resistance Creepage Distance 1000 megohms min. at 20C, 500 VDC, 50% RH 8 mm At nominal coil voltage -40C (-40F) to 70C (158F) -40C (-40F) to 105C (221F) 0.062" DA at 10-55 Hz Minimum operations 1 x 106 1 x 104 at 100 A 240 VAC Res. 36 ms minimum 12 ms at nominal coil voltage 6 ms at nominal coil voltage COIL Power At Pickup Voltage (typical) Temperature 1.44 W single coil 2.88 W dual coil Max. 105C (2221F) Ambient Temperature Operating Storage Vibration Shock Operating 10 g, 11 ms, 1/2 sine (no false operation) Non-Operating 100 g, 11 ms, 1/2 sine (no damage) Enclosure P.B.T. polyester Tinned copper alloy P. C. (coil), heavy tabs (power) 270C (518F) 5 seconds 82 grams NOTES 1. All values at 20C (68F). 2. Relay may pull in with less than "Must Operate" value. 3. Specifications subject to change without notice. 4. Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. Terminals Max. Solder Temp. Max. Solder Time Weight 1/21/09W AZ2510 AZ RELAY ORDERING DATA COIL SPECIFICATIONS - Standard Single Coil Nominal Coil VDC 6 12 24 48 Must Operate VDC 4.8 9.6 19.2 38.4 Max. Continuous VDC [1] 10 20 40 80 Coil Resistance 10% 16 64 260 1024 ORDER NUMBER AZ2510P1-1A-6D AZ2510P1-1A-12D AZ2510P1-1A-24D AZ2510P1-1A-24D COIL SPECIFICATIONS - Standard Dual Coil Nominal Coil VDC 6 12 24 48 Must Operate VDC 4.8 9.6 19.2 38.4 Max. Continuous VDC [1] 10 20 40 80 Coil Resistance 10% 8 32 130 512 ORDER NUMBER AZ2510P2-1A-6D AZ2510P2-1A-12D AZ2510P2-1A-24D AZ2510P2-1A-48D [1] max. continuous voltage should not be applied for more than 30 seconds. MECHANICAL DATA Wiring Diagram 2.372MAX [60.25] 1.782MAX [45.25] 1.421 [36.10] .756 [19.20] .059 [1.50] 1.585MAX [40.25] 1.880MAX [47.75] 1(-) Set 2(+) Reset 3(-) Dual Coil 34 .512 [13.00] 3X.039 [1.00] .197 [5.00] 2 .243 [6.16] .197 [5.00] .571 [14.50] 3X.028 [0.70] 2.372MAX [60.25] 1.746 [44.35] .197 [5.00] .016 [0.40] 3X.039 [1.00] .197 [5.00] 0.329 [8.36] 3X.028 [0.70] 0.571 [14.50] 1(-) (+) 2 3(+) Set (-) Reset .876MAX [22.25] .433 [11.00] 2xM6 Single Coil TOP VIEW BOTTOM VIEW Dimensions in inches with metric equivalents in parentheses. Tolerance: .010" 1/21/09W |
Price & Availability of AZ2510P2-1A-12D |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |